Low cost, easy replacement relay.Direct replacement power relay for many popular kiln models such as "TF types" . These relays can also be used with temperature controllers such as "Bartlett Controllers with 12VDC output" and "Infinite Control Switches".Relay Coil voltage: Refer to the selection table to the right.It is important to select the correct relay coil voltage. The relay coil voltage may not always be the same as the supply voltage to the kiln and the elements. Some kilns with a digital temperature controllers use 12 VDC or 120 VAC relays. To identify the "relay coil voltage", check the markings on the side of the relay or refer to the electrical schematic for the kiln.Coil Data: (AC coil: 4.0VA), (DC coil: 1.7W)(2) Coil Terminals: Located left side of relay in photo(2 pairs) Switch Contact Terminals: Located on the right side of relay in the photo. Each pair is 1 outside and 1 inside terminal.Switch Contact ratings: (2) normally open contacts, 30 Amp- 250 Volt (max)Expected Mechanical Life: 100,000 operations at rated loadDimensions: 1.38 wide x 2.7 long x 1.48 high
15 School Street,
Riverton, CT 06065
and Conditions, Disclaimer, © Duralite, Inc.