ELEMENT SPECIFICATIONS:

Select your element from the "ELEMENT SELECTION TABLE" in the upper right.

Then enter the "quantity" of elements next to the "ADD" Button.

ELEMENT No.	Volts	Amps	Watts	Coil Dia.	Installed length
DURA 005677	115	10	1150	0.38	50-150 in
DURA 005682	115	12	1400	0.38	62-175 in
DURA 005683	115	14	1600	0.38	52-150 in
DURA 005684	115	15	1750	0.438	58-160 in
DURA 006548	120	16	1900	0.44	58-150 in
DURA 006549	120	17	2000	0.44	55-150 in
DURA 005678	208-240	6.5-7.5	1350-1800	0.38	98-280 in
DURA 005679	208-240	8-9.2	1650-2200	0.38	80-240 in
DURA 005680	208-240	10.8-12.5	2250-3000	0.38	130-350 in
DURA 005681	208-240	14.4-16.7	3000-4000	0.438	110-310 in

These are coiled wire heating elements (see Special Note below) which are used for many applications such as ceramic kilns, glass kilns, glass anealers, and many more do-it-yourself projects. The coiled element can be stretched to it's "Installed length" and formed to fit many applications.

Installed Length: Elements are shipped unstretched, and require to be stretched to the "Installed length" (see table above) for normal operating performace. Do not cut any of the element coils, as it will alter the performance of the heating element.

Terminal leads: All elements come with twisted leads (10 in long) for electrical connections. The twisted leads can be cut shorter to suit the application.

Wire Specs : Element wire alloy is Kanthal A1, 875  or equivalent(2550°Fmaximum wire temperature), 13-16Ga, typical wire loading 18 Watts/sq in or less.

Special Note:

These elements may be used as "replacement elements" for kilns. They are intended for use by repair professionals and kiln builders with a good understanding of electrical principals such as OHM's LAW and electrical safety codes  . Many kilns have different element specs depending upon element location and wiring configuration. These elements are not returnable because when they are assembled or installed we have no way of knowing if they have been damaged.  We can not resell a heating element that has been returned and take the chance we are sending a customer a damaged product. Ask before you order if you think you will be wanting to return it. Need something different? Just send us a email with your requirements. 

If you are looking for replacement elements for a kiln, we suggest you fill out this form below and submit it to us.